Notes:

  • Product upgradation is a continuous process at TORNEIRA. Therefore, the specifications may change from time to time.
  • Please verify the actual product for correct specifications, before purchase.
  • The colours of ceramic/plastic/stainless steel and other materials used for manufacturing TORNEIRA range of products and those of printing inks do not match exactly. Therefore, colour selection may be done from actual products.
  • Whilst every precaution is taken in the compilation of our price list, we do not accept responsibility for any error or omission.
  • All dimensions are in millimetre (nominal).
  • Prices are subject to change without prior notice.
  • Recommended cleaner shall be used to clean the product for availing necessary warranty.
  • The product Warranty will become null and void, will be avoided and will not remain valid and extra service charge will be made applicable:
    • if the installation/repair is not done as recommended by the Company and/or if not done by qualified and trained technicians,
    • if the Product is found tempered/misused, any warranty norms are violated,
    • if the customer is unable to produce copy of invoice/warranty card at the time-of-service visit.
  • if the breakdown is not arising out of manufacturing defect, but due to any external reasons such as but not limited to: water impurities, masonry, electrical, plumbing error, water hardness beyond permissible limits, inadequate or excessive water pressure, non-usage of product for more than 6 months, usage of abrasive cleaners, ammonia, bleach, acid, wax, alcohol, solvent or any other non-recommended items on product, or improper care and cleaning of the product.
  • For any and every type of technical, service or warranty assistance, please visit our WEBSITE at TORNEIRABATH.COM or Email us at INQUIRY@TORNEIRABATH.COM or contact the nearest TORNEIRA dealer or area representative.
  • This supersedes all previous pricelists.

For Optimum results of the Product:

  • For better performance of the product, we recommend water pressure should be between 2.5 bar to 3 bar.
  • Keep the minimum number of bends in the pipeline and make it travel straight and vertical as far as possible.
  • All the supply must have vent pipes. These vent pipes help in removing air locking in the water supply to give a flow of water from the fittings.
  • To protect the fittings from dirt, stains and other damages, cover them with cloth/polypack after their installation till they come into actual use.
  • Test the working of all the concealed fittings installed on a high pressure for leakage before plastering or fixing the line.
  • Clean the aerators provided in the items at regular intervals for a perfect foam flow of water from the fittings.
  • Place the outlet point in the overhead tank at least 25cm above the ground level of the tank, this prevents the flow of the working parts. Clean the tank thoroughly before the supply starts. It is suggested that the overhead tank must be cleaned at regular interval to avoid deposition of foreign particles.
  • Clean the tank thoroughly before the supply starts. Itis suggested that the overhead tank must be cleaned at regular interval to avoid deposition of foreign particles.
  • Do not use strong harsh cleaning agents containing abrasive, acids detergents as this may cause damage to the chromium/outer finish.
  • Insist on genuine spares from the company’s local service centre or its authorised stockist in case of repair or replacement.